Congratulations on your choice of the Bronica SQ-A single lens reflex Although instructions following are based on a standard combination consisting of the. View and Download BRONICA SQ-A manual online. SQ-A Digital Camera pdf manual download. View and Download Zenza Bronica SQ-A instructions manual online. Zenza Bronica SQ-A Single lens Reflex Camera. SQ-A Film Camera pdf manual download.
|Published (Last):||3 May 2008|
|PDF File Size:||5.61 Mb|
|ePub File Size:||6.22 Mb|
|Price:||Free* [*Free Regsitration Required]|
Comments to this Manuals Your Name. When set to Sm, there is single exposure operation and when set to Cm, there is continuous exposures while the shutter release button is depressed.
For shooting with the mirror locked up, rotate the mirror lock-up lever in the arrow indicated direction and coincide S or C to the index. The SQ-Am uses six AA batteries to drive the motor, in addition to the a small 6 volt battery to power the camera’s shutter and meter. Specifications Of Zenzanon-s Lenses When in focus, however, the two halves will coincide with the displacement disappearing. Construction Of Film Back 4.
Similar to the 6×4. Thus, it is possible to choose the film type most suited to the shot, even midway in the roll. Simply shift the film back up slightly and pull it away. The new dark slides are now grey in color.
Bronica SQ-A Instruction Manual – Page 1 of 27 |
Page of 27 Go. By pressing ‘print’ button you will print only current page.
See “23 Multiple Exposures”. A longer shutter speed of 16 seconds is added to the body, along with a traditional bulb mode shutter setting instead of just T, but it drains battery power while in use. Use a R filter or equivalent with an infrared black-and white film. This page is copyright byM.
Since the body and back need to be synchronized, make sure to wind the film crank completely before attaching the back. The top one is for the fresh film spool while the bottom one is for the empty take-up spool.
ZENZA BRONICA SQ-A INSTRUCTIONS MANUAL Pdf Download.
To attach the lens to the body, align the orange dot on the camera main body and the red dot on the lens, and then insert the lens fully into its mount. See page 29 on Mirror Lock-Up.
Intermediate settings are also possible. Double exposure can be prevented, in the above case, by the following methods. C continuous – For shooting continuously with mirror lock-up. The lens is focused on the subject by rotating the focusing ring in either direction, while OFF, check for the cause of the overload and rectify it. Inserting the plug of an external power source into the external power sq–a automatically switches power supply to the motor drive system from the internal battery power six AA size batteries to the external power.
To remove the film back from the camera main body, insert the dark slide into the dark slide slit, as illustrated, with the O mark on the dark slide at the top end. Next, place the plastic ring cover over the U-shaped ring, as illustrated.
Zenza Bronica SQ-A Instructions Manual
Continuous shooting is pos sible if sufficient preloaded film backs are available. The film back also contains a crank, useful for setting the film start index. Both have very good cold weather resistance. The drive is specifically for the Ai and does not function properly with other SQ models. Then, continue photography in the normal manner. Rotate in the counterclockwise direction until it stops, with an audible click, which will indicate that it is securely locked.
Mnual not have bulb mode, since the SQ-A did not have it either. Zenzanon-S Variogon mm Manusl. The T mode will function on lenses equipped as such.
First, return the mirror lock-up The expo- sure counter will also change from “S” to “1”, while the shutter will also be cocked. This will help you keep track of the film loaded in the film back, even when two or more film backs are used with different films.
Insert the leading end into the slit of the take-up spool and wind slightly until securely engaged. S single frame – For shooting single frame with mirror lock-up. However, since the film will not be advanced to the next frame, in this case depress the drive button to advance the film.
Attachment Of The Neck Strap On the other hand, should the drive button be depressed when a film back is attached with film advanced properly and, there fore, in condition for photo graphy, the film will not ,anual ad vanced.